Today I decided to replace the foam under the mirror on the Bronica S2 again . The special foam I was using before was too hard and sometimes I focused completely different than I wanted. Now I used a different special foam, but it is intended for drywallers and not for repairing cameras. Even though it is ten times cheaper, it does the job perfectly. Since I had nothing to take pictures of, I at least pointed the lens at another old camera(TLR Flexaret) that I am repairing now🙃📷🛠
- Zenza Bronica S2 + Nikon P f 2,8/75mm
- Ilford FP4 Plus + D76 homemade stock(continuous agitation)
- Fomaspeed Variant 312 split grading + homemade Dektol
![](https://razdva.net/wp-content/uploads/2023/05/66100023_ZBS2_FP4_D76STOCK-1024x1009.jpg)
![](https://razdva.net/wp-content/uploads/2023/05/66100023_ZBS2_FP4_D76STOCK_007-1024x1024.jpg)
![](https://razdva.net/wp-content/uploads/2023/05/66100023_ZBS2_FP4_D76STOCK_010-1024x1011.jpg)
All photos are my own and copyrighted. Their use is prohibited without my written consent.MIC©